PET-CT Positron Emission Tomography Computed Tomography

  • PET-CT Positron Emission Tomography Computed Tomography
  • PET-CT Positron Emission Tomography Computed Tomography
PET-CT Positron Emission Tomography Computed Tomography
สถานที่กำเนิด: มณฑลกวางตุ้งประเทศสาธารณรัฐประชาชนจีน
ชื่อแบรนด์: Basda Medical
ได้รับการรับรอง: CE, ISO13485
หมายเลขรุ่น: BPT-48
จำนวนสั่งซื้อขั้นต่ำ: 1 หน่วย
ราคา: Negotiable
รายละเอียดการบรรจุ: 1 หน่วย / กล่องไม้
เวลาการส่งมอบ: 60 วัน
เงื่อนไขการชำระเงิน: บัตรเครดิต, Paypal, T / T, Western Union, MoneyGram
สามารถในการผลิต: 300 เครื่องต่อปี
POD ที่ Console: ควบคุมด้วยมือ CT ISO-PET ระยะ ISO (มม.): 551.8
การหมุน Gantry: ขับเคลื่อนด้วยสายพานดิจิตอล Digital อุปกรณ์กำหนดตำแหน่งเลเซอร์: ในตัว
เส้นผ่าศูนย์กลางพอร์ต (ซม.): 70 ซม ระบบกำหนดตำแหน่ง: เลเซอร์ 3 มิติ


PET-CT Positron Emission Tomography Computed Tomography

Product Description


The CT gantry construction is made up of a very solid and sturdy aluminum casting for both stator and rotor. Moreover, the gantry rotate bearing and rotate drive components are integrated in a way to ensure the scanner’s rigidness and stability. During rotation, the stator and rotor has minimum vibration, deformation and jitter in all directions. Therefore, the stability of the scanner allows the X-Ray tube focal spot to be accurately aligned to the center of the detector which accurately locates the X-Ray beam distribution across the detector to guarantee the image quality.



Zero Deformation:
Virtually no deformation is occurring with the Detector Channels during rotation due to the rigidity of the rotor. The stability of the detector subsystem allows for stable, consistent and accurate image generation.


Zero Vibration:
The vibration measured at a rotational speed of 0.5 s/360°, is less than 0.3 mm/s. This is achieved by the rigidity of the stator and rotor designs.
HV Generator:

The BPT-48 PET/CT High Voltage Generator is manufactured by Spellman High Voltage Electronics Corporation. Spellman is the world’s leader and producer of high voltage power supplies and X-Ray generators.






BPT-48 PET/CT uses an X-Ray tube that is manufactured by DUNLEE, USA. The X-ray tube is a very mature design and widely used which brings stability and long tube life. The tube has an anode heat storage of 5.3 MHU and an anode cooling rate of 815 KHU/min which allows longer scan times and high patient throughput. The tube current range is 10~420 mA. The tube voltage range is 80~140 kV. The tube focal spot sizes are 0.7*1.2 mm for the small and 1.2*1.2 mm for the large.




The CT system has multiple temperature sensors that are monitored in real time to ensure that the gantry and detector cooling is working within the specified ranges and to eliminate any possible image artifacts that would be caused by having an unstable operating temperature or temperature drift.



The CT System controls were designed and packaged to be in a single location on the gantry. This optimizes the cooling that is required for the components and provides a platform for meeting all of the shielding requirements for EMC. In addition the system controls packaging design allows for minimum space being needed for maintenance.



BPT-48 PET/CT has the fastest CT scanning speed among all the 16-slice CT systems with a scan speed of 0.5 s/360°. This not only gives you quicker patient throughput but also reduces any motion artifacts that would be due to any respiratory motion.

PET-CT Positron Emission Tomography Computed Tomography 0
Company Profile

Here is the brief introduction of our company. Basda Medical is the factory of our own brand medical apparatus machines. Our company has several full integrated medical product lines, with currently 10 different series products, including superconducting MRI, permanent MRI, nuclear medicine, radiotherapy, CT, digital X-ray, ultrasound, health examination vehicle, patient monitor, ECG and medical software, in total over one hundred models of products. Basda Medical has topped the best-selling permanent MRI in China for consecutive 5 years.



As a leading and innovative medical technology and digital solutions provider in China, Basda Medical was established in 2000. Located in Shenzhen, the frontier city of China’s “reform and opening up”, Basda Medical has emerged and developed as a National High-tech Enterprise focusing on R&D, production, trading, and services on medical imaging, digital solutions and radiotherapy products.



Basda Medical’5 series products are included in the key research areas of China’s government directed program " China Manufacturing Strategy 2025". We are known as the one of the earliest manufacturers of 3.0T MRI system, helium free superconducting MRI system, 0.5T and 0.7T open superconducting MRI systems, extremity MRI system and dual head SPECT in China. 



With our qualified products and excellent service, we have over 3000 global users from over 40 countries globally including Europe, Africa, Latin America, Middle East and South East Asia. At present, we have several international quality control certifications to meet the quality and safety requirements of users in various countries.




Basda Medical continues to keep "technology safeguards our lives" principal, and build five centers of “medical imaging center, healthcare examination center, remote diagnosis center, cancer treatment center and medical healthcare service center”. We strive to build the comprehensive medical imaging chain, precision treatment, Internet, AI medical information software, and become the world’s technology innovation leading enterprise in the new era.



Shenzhen Basda Medical Apparatus Co., Ltd

ผู้ติดต่อ: Peng

โทร: +86-18124770842

ส่งคำถามของคุณกับเราโดยตรง (0 / 3000)

ผลิตภัณฑ์อื่น ๆ


ที่อยู่: ชั้น 19 บล็อก 1A อาคาร Basda เลขที่ 28 ถนนหนานทงเขตหลงกังเซินเจิ้นมณฑลกวางตุ้ง P.R.C.

ที่ตั้งโรงงาน:บล็อก 1B อาคาร Basda เลขที่ 28 ถนนหนานทงเขตหลงกังเซินเจิ้นมณฑลกวางตุ้ง P.R.C.